Explore the Ultimate Tubeless Setup Kit
  • Ultimate Tubeless Setup Kit
Ultimate Tubeless Setup Kit
  • contains rim tape & vavles
  • contains tubeless sealant
  • for mtb/road/gravel

Ultimate Tubeless Setup Kit

SKU Code: 20084
€50,99

A kit complete with every essential needed to join the tubeless revolution. Five different kits for all kinds of bikes. Our Ultimate Tubeless Setup Kit is a one-stop shop for everything you need to make the switch with your tubeless-ready wheelset. Read more

  • 5x sizes
  • great value
  • Free delivery over €50
    Free delivery over €50
  • No customs fees (shipped from EU)
    No customs fees (shipped from EU)
  • Free Muc-Off sticker with every order
    Free Muc-Off sticker with every order

Pairs great with:

Lorem Ipsum ispum lorem

Lorem ipsum ispum lorem lorem ipsum ispum lorem.

See it in action

The ultimate kit for a tubless conversion from MTB to Road, Gravel to CX and Enduro to downhill we've got you covered:

  • Everything you need in one simple kit
  • Say goodbye to carrying spare tubes!
  • Check our our how to featuring the Deakinator 

  • Description

    Zestaw Muc-Off Ultimate Tubeless Kit zawiera wszystko, co potrzebne do przygotowania zestawu kół bezdętkowych i przygotowania go do jazdy. Każdy zestaw zawiera taśmę na obręcz Muc-Off Tubeless Rim Tape, łatki uszczelniające, 2 czarne zawory bezdętkowe obrabiane CNC i 2 woreczki uszczelniacza No Puncture Hassle Tubeless Sealant.

    Dostępnych jest 5 zestawów do:

    • Szosa/szuter/CX z płytkimi obręczami (wentyle bezdętkowe 44 mm i taśma na obręcz 21 mm x 10 m)
    • Szosa/szuter/CX z głębokimi obręczami (wentyle bezdętkowe 60 mm i taśma na obręcz 21 mm x 10 m)
    • XC (wentyle bezdętkowe 44 mm i taśma na obręcz 25 mm x 10 m)
    • DH/Enduro (wentyle bezdętkowe 44 mm i taśma na obręcz 30 mm x 10 m)
    • DH Wide (wentyle bezdętkowe 44 mm i taśma na obręcz 35 mm x 10 m)

  • VALVE Size Guide

  • HOW TO

    1. Remove all old rim strip or tape and clean rim.
    2. Make sure the rim is clean and dry before applying tape.
    3. Get the tape from the packet and line it up from the opposite side of the valve.
    4. Start by unwinding a small amount of the tape and pressing it down using your thumb or finger to hold pressure down.
    5. Continue to hold while you pull back on the tape and stick down tight once you have a few cm on the tape will stick and holding is no longer needed.
    6. Continue the entire way around the rim (if it has a big concave in you can pull and wiggle the tape to fill any edges)
    7. Overlap the tape by roughly 10 – 15cm
    8. Leave a small amount unstuck so that you can cut the remainder off
    9. Once cut sketch and pull the tape down to create a seal
    10. Go around the rim with your thumb to make sure there is no air pockets or messed areas.
    11. Once your happy with how it looks using a small pin locate the valve hole and cleanly pierce the tape ready for the valve
    12. Grab your tubeless valve and remove the lock ring and o ring
    13. Chose the right rubber fitment for your rim tape and insert valve into rim
    14. Refit O-ring and Lock ring making sure you lock the valve in (don’t go to tight or could damage the rubber)
    15. Re-fit your tyre of choice carful not to damage the tape (by using tyre levers ect)
    16. Inflate tyre to create a fit (should hear some popping around the rim)
    17. Release Air and remove valve core using the spare valve cap
    18. Grab the sealant pouch and give it a shake
    19. Unscrew the cap and fit on the valve in a up right position
    20. While holding the pouch spin the wheel downward so that the pouch is now upside down
    21. Insert the sealant by rolling the pouch down
    22. Spin wheel back up right and remove pouch
    23. Reinsert valve core and inflate to your pressure


  • RIM TAPE SIZE GUIDE

  • What's included?

    • 1x 10m roll of Tubeless Rim Tape
    • 2x Seal Patches
    • 2x Black Tubeless Valves
    • 2x Valve caps
    • 2x Locking nuts
    • 1x Valve core removal tool (doubles as a spare valve cap)
    • 3 x Pairs of rubber bases for size choice
    • 2x Pouches of No Puncture Hassle Tubeless Sealant

  • Reviews

    Trustpilot

  • Everything needed to get set up and ready to roll

    Our Ultimate Tubeless Setup Kit is a one-stop shop for everything you need to make the switch with your tubeless-ready wheelset.

  • Wide range of sizes available

    Kits available for road, gravel and CX to enduro, trail and downhill.