Explore the Frame Protection Kit - Bolt
  • Frame Protection Kit - Bolt
  • Frame Protection Kit - Bolt
  • Frame Protection Kit - Bolt
  • Frame Protection Kit - Bolt
  • Frame Protection Kit - Bolt
  • Frame Protection Kit - Bolt
Frame Protection Kit - Bolt
Frame Protection Kit - Bolt
Frame Protection Kit - Bolt
Frame Protection Kit - Bolt
Frame Protection Kit - Bolt
Frame Protection Kit - Bolt
  • fits most bikes
  • ultra-tough cube-tec protection
  • weatherproof 3m self-adhesive backing

Frame Protection Kit - Bolt

SKU Code: 20313
€18,00 (€28,00)

Protect your frame’s paintwork and graphics against scratches, stone chips and cable rash with our Frame Protection Kit. Featuring innovative Muc-Off Cube-Tec technology to provide a protective barrier. Read more

  • easy to install
  • protects against scratches & scuffs
  • Darmowa dostawa powyżej 50
    Darmowa dostawa powyżej 50
  • Brak opłat celnych (wysyłka z UE)
    Brak opłat celnych (wysyłka z UE)
  • Bezpłatna naklejka Muc-Off do każdego zamówienia
    Bezpłatna naklejka Muc-Off do każdego zamówienia

SEE IT IN ACTION

To keep your steed looking factory fresh whatever the conditions, you need a layer of battle-ready protection. Our Frame Protection Kits offer a combination of strength and durability to protect against potential scratches, scuffs and stone chips.

HIGHLIGHTS

  • Backed with ultra-strong 3M self-adhesive 
  • Two kits universally designed to fit most MTBs and EMTBs 
  • Ultra-tough Cube-Tec material to withstand the gnarliest of impacts

  • Description

    Des rayures et des éclats de pierre sur votre vélo ? Absolument pas ! Protégez-vous avec la série de protections pour vélo Muc-Off.

    Nous proposons deux kits distincts conçus pour le VTT et les EMTB, et disponibles en quatre options graphiques épiques pour s'adapter à tous les styles, le kit de protection de cadre est composé de plusieurs formes et tailles universellement conçues pour couvrir toutes les zones à haut risque de votre vélo.

    Développé à partir de zéro et doté du nouveau matériau exclusif Muc-Off Cube-Tec, le kit de protection de cadre forme une barrière autour de votre vélo suffisamment solide pour résister aux impacts les plus violents, tout en étant suffisamment flexible pour s'adapter à pratiquement toutes les géométries de cadre.

    Chacune des 45 pièces contenues dans le kit est dotée d'un support auto-adhésif 3M ultra-résistant, ce qui signifie qu'elles sont très faciles à installer et resteront fermement en place quelles que soient les conditions - vous pouvez donc vous concentrer sur le maintien en place !

    3M™ est une marque déposée.

  • FEATURES

    DH-ENDURO-TRAIL FRAME PROTECTION KIT

    Downtube width dimensions: 45-70mm width

    • Easy to apply: Simply peel off and install!
    • Ultra-Tough Cube-Tec protection shields against scratches, scuffs, stone chips, cable rub and other damage to your frame
    • Durable, weatherproof 3M adhesive
    • 45-piece pack is designed to fit most DH/ENDURO/TRAIL bikes
    • Available in loads of awesome designs!


    E-MTB FRAME PROTECTION KIT

    Downtube width dimensions: 85-100mm width

    • Extra wide downtube pieces to cover wider E-Bikes
    • Easy to apply: Simply peel off and install!
    • Ultra-Tough Cube-Tec protection shields against scratches, scuffs, stone chips and other damage to your frame
    • Durable, weatherproof 3M adhesive
    • 45-piece pack will fit most E-MTB’s with wider down tubes
    • Available in loads of awesome designs!


  • HOW TO

    1. Clean your bike thoroughly before application. For best results and optimum durability spray Muc-Off Disc Brake Cleaner or Dry Degreaser onto a clean, dry microfibre cloth and wipe over the surface to ensure it is contaminant free. (Always test the disc brake/dry degreaser cleaner on a small inconspicuous area prior to use to ensure finish compatibility!) 
    2. Try to fit the guards in a clean and warm environment, this will help achieve good adhesion to the surface. Top Tip! If you are applying in colder conditions and have access to a hairdryer, then carefully warm the surface. This will help achieve an optimal adhesive bond. 
    3. Peel the guards off the backing material and line up the centre of the guards to the area you are applying. NB: It’s important you start with each sticker in the dead centre of the area you are applying so chill and take your time on this section! Then slowly rub down the middle, working your way out to the sides pushing out any air bubbles to the edges. Top Tip! You can easily trim the shapes as required, if necessary, with clean, sharp scissors if you need to fit around any challenging shapes or frame mounts etc. 
    4. Use a clean microfibre cloth to firmly rub down the guards onto the surface and make sure you cover all areas with even pressure. 
    5. Sit back and admire your freshly wrapped pride and joy, now go ride.

    REMOVAL: Ready to switch up your graphics? Removal is easy! 

    1. Start by gently heating the surface of the stickers with a hairdryer. This will help soften the adhesive, then slowly start peeling up a corner of the guards and peel back as carefully as you can, try to keep the adhesive attached to the protective layer so it all comes off in one piece. 
    2. Once each protection guard is removed use Muc-Off Glue & Sealant Remover to easily remove any residue before re-installing your new guards! (Always test the Glue & Sealant Remover on a small inconspicuous area prior to use to ensure finish compatibility!). *age restrictions may apply!

  • PROJECT GREEN

    Project Green is our never-ending commitment to deliver a multitude of environmentally-focussed improvements across our business. We love the planet we ride on, it’s our playground, and we’re driven to protect it for everyone.

    This product has a Project Green credential; meaning that it’s either biodegradable, refillable, reusable, or all three!

    What are this products Project Green credentials?

    This product is packaged with easily recyclable cardboard packaging, as well as helping to extend the life of your bike by protecting the metalwork. No scratches & scuffs = keeps your bike looking brand-new for longer.

  • Frequently Asked Questions

    What if the sticker doesn’t fit the area or component I am fitting it to perfectly?

    The stickers can be easily trimmed down to size with scissors and we’ve even designed the stickers with set trimming indent slots to help facilitate with this in areas we think may need to be adapted for the perfect fit.

    What if I apply the protection stickers incorrectly or not straight?

    Don’t worry, stay calm, then very carefully and slowly peel the stickers back. If you have access to a hair dryer try and apply some heat to the area as this will help soften the adhesive and allow re-positioning of the sticker.  When applying the clear stickers, using water to help apply these will also allow easy repositioning when fitting.

    Will the frame protection kits fit a road or gravel bike?

    We have designed the frame protection kits to provide coverage on MTB and EMTB bikes meaning that they are too wide for road and gravel bikes.

    Can I use a pressure washer to clean my bike after applying the frame protection stickers? 

    It is safe to use a bike specific pressure washer like ours, however do not point the pressure washer nozzle close up and directly towards the edge of the protective sticker.

    Can I clean my bike with Bike Cleaner after applying the frame protection?

    Yes but we recommend leaving them for at least 24 hours before getting any cleaner or water on them so the adhesive has time to achieve  an optimal adhesive bond to the surface.

    Do I have to use water and a squeegee to apply the clear gloss and clear matt protection stickers?

    Yes we recommend using water to apply these stickers to achieve the best clarity under the stickers. This method helps push out all air bubbles and imperfections so you are left with a crispy clear finish.

  • What's Included

    • 45-piece pack is designed to fit most front suspension forks 
    • Choose between DH/Enduro/Trail or E-MTB kit depending on bike type

  • Recenzje

    Trustpilot

  • It's not going anywhere

    Backed with ultra-strong 3M self-adhesive backing for ultimate durability against the elements

  • battle-ready protection

    Ultra-Tough Cube-Tec protection shields against scratches, scuffs, stone chips, cable rub and other damage to your frame