Explore the Inner Tube Sealant
Inner Tube Sealant
Inner Tube Sealant
Inner Tube Sealant
Inner Tube Sealant
  • non-tubeless
  • quick & easy use
  • suitable for both valve types

Inner Tube Sealant

SKU Code: 20216
€15,99

No Puncture Hassle Inner Tube Sealant is easy-to-install and seal holes in inner tubes ensuring that your ride is uninterrupted! Read more

  • inner tubes
  • mtb & road
  • puncture repair

📌Which Sealant Do I Need?

Learn more about our sealant range to find out which one is right for you.

  • Free delivery over €50
    Free delivery over €50
  • No customs fees (shipped from EU)
    No customs fees (shipped from EU)
  • Free Muc-Off sticker with every order
    Free Muc-Off sticker with every order

Pairs great with:

SEE IT IN ACTION

No Puncture Hassle Inner Tube Sealant brings the puncture protection of tubeless to inner tubes.

HIGHLIGHTS

  • Seals holes up to 3-4mm
  • Works with Road, CX/Gravel and MTB wheels inner tubes
  • Compatible with both Presta (with removable core) and Schrader valves

  • Description

    Riez face aux crevaisons avec notre produit d'étanchéité pour chambre à air ultra léger mais efficace ! Le produit d'étanchéité pour chambre à air Muc-Off No Puncture Hassle est facile à installer et les molécules de pointe scellent les trous dans les chambres à air jusqu'à 4 mm, garantissant ainsi une conduite ininterrompue ! Notre formule exclusive à base d'eau non dangereuse a été développée spécifiquement pour une utilisation avec des chambres à air et est compatible avec une large gamme de vélos. Que vous vous déplaciez au travail, que vous partiez en aventure avec un sac à dos, que vous empruntiez les sentiers ou tout ce qui se trouve entre les deux, nous avons ce qu'il vous faut !

    Convient uniquement aux chambres à air avec valves Schrader et Presta avec noyau de valve amovible. Ne convient pas aux pneus tubeless. Découvrez nos produit d'étanchéité pour tubeless ici

  • FEATURES

    • Puncture prevention for inner tubes
    • Suitable for MTB, road, eBikes, commuter, urban, folding & touring
    • Seals holes in tubes up to 4mm
    • Works on multiple punctures
    • Does not dry out
    • Lasts the life of the inner tube
    • Contains anti-corrosion inhibitors
    • Contains cutting-edge molecules to help seal holes quickly and effectively
    • Water-soluble
    • Non-Hazardous
    • Works in temperatures from -15°C to +50°C

  • HOW TO

    For inner tubes using a Schrader Valve:

    1. Remove the dust cap from your valve and deflate the air from your tyre then spin your wheel so your valve is between 9 and 12 o’clock position. 
    2. Turn and pull up the plastic tube from the top of the bottle. 
    3. Remove the pink valve core remover tool from the top of the tube then remove your valve core from the valve stem. (Insert the two-pronged tool into the top of the Schrader valve and unscrew anti-clockwise to extract the core or use the slot in the top to remove a presta valve core. Keep your valve core safe whilst filling!) 
    4. Re-install valve core using the tool and tighten clockwise until tight then inflate the tyre to the desired pressure in accordance with your manufacturer’s recommendations.
    5. Give your wheel a spin and you're good to go!

    For inner tubes using a Presta Valve:

    1. If you are filling the sealant into a Presta valve, fit the black o-ring fitted to the pink valve core remover tool onto the valve stem, now fit the end of the filling tube onto the valve stem until it meets the o-ring and spin your wheel so that your valve is at the 6 o’clock position. 
    2. With the bottle upside down, squeeze gently on the bottle to dispense the desired amount of sealant into the valve. Ensure sealant flows smoothly into the valve. (Fill the recommended amount for your inner tube using the dosage scale on the side of the bottle). 
      If you are filling into a Schrader valve you don’t need to use the o-ring.
    3. Remove the filling tube and o-ring from the valve and wipe away any sealant residue. 
    4. Re-install valve core using the tool and tighten clockwise until tight then inflate the tyre to the desired pressure in accordance with your manufacturer’s recommendations.
    5. Give your wheel a spin and you're good to go!

  • What's included

    • Inner tube sealant
    • Valve core removal tool (integrated into bottle cap)
    • 1 x O-ring

    PLEASE NOTE: 1L size does not include valve core removal or O-ring.

  • Reviews

    Trustpilot

  • Prevents Punctures on Inner Tubes

    Works on regular inner tubes, tubeless tyres and rims not required!

  • Seals Holes Up to 4mm

    Does not dry out and lasts the life of the inner tube.